Planning a resolved sample

I'm to make a resolved sample based on techniques, shapes and/or colours already used in previous chapters, using at least two techniques previously used on the course and based on movement. I felt as though I'd rather lost touch with what I was doing with this module so it was very helpful to get everything out and look at it again ... including the previous two modules.

I came up with a list of possible techniques :

• use of complementary colours
• patterns using repeating motifs - different sizes; layered (add embroidery and/or beads); cut and separated
• bonded fabrics (and threads)
• Fibonnacci - e.g. spiralling log cabin?
• tones of one colour
• cords, beads, buttons

There could easily have been more but I wanted to at least try to limit myself to a manageable list.

Fig.1

 I started by playing with a variety of different shapes using the Fibonacci sequence. The only trouble with this is that the numbers very quickly become too large and unwieldy - but worth bearing in mind.

Fig.2

 I was attracted by the meteorological photograph of a tornado from my original research images and looked for more tornado images online.

Fig.3

Then I printed out one of the Photoshop images I had done earlier and used that as a background for a spiral of circles and rings in decreasing sizes. I'm thinking that these could be made of wired cords, buttonholed rings, Dorset buttons and beads in my sample. 

Chapter 8: Beads, beads and more beads!

This chapter was all about finding how many different ways I could stitch with beads. The answer, I found, was ... a great many, and how much fun it was playing with beads!

 

Fig. 8.1

I began with some of the suggestions in Sian's notes, so, reading from left to right across each row ...

Top row: 

1. Compact area of one type of bead

2. A compact area using two types of beads (bugle and seed)

3. Lightly sprinkled seed beads

Centre row:

4. Lines of beads using one type of bead

5. Lines of beads using more than one type of bead

6. Lines of sequins

Bottom row:

7. A pattern formed of bugle beads

8. A pattern using three types of bead

9. A large flat bead (actually a washer) trapped under organza with seed beads 'piled' in the centre and scattered around the organza to hold the washer in place.

Around the edges:

A variety of edgings and fringes.

 

Fig. 8.2

I hadn't run out of ideas so I made another sample. Again, reading from left to right across each row

Top row:

1. Lozenge shaped beads attached with four stitches

2. Circular beads attached with bullion loops

3. A sample of square stitch (which looks like loom work but isn't)

Centre row:

4. Piles of 2, 3 and 4 beads

5. Pairs of bugle beads tied with a cross stitch

6. Beads made from peyote stitched seed beads - a little fiddly to join together but quite effective.

Bottom row:

7. Feather stitch using beads in two different ways

8. Herringbone stitch using beads, again in two different ways

(I could have gone on almost for ever using beads to form embroidery stitches but stopped after these two)

9. A spiral of seed beads

Top edge:

Clusters of seed beads used as edging

Right hand edge:

Loops of seed beads used as edging

Bottom edge:

Horizontal netting fringe

Left hand edge:

Strings of seed beads with a leaf bead in the centre used as an edging.

 

Chapters 5-7: Cords, Tassels and Buttons

These three chapters were addictive and I did feel as though I could have gone on and on adding more and more samples but time pressures demanded that I stop so I've added a selection here to show the various types of each that I played with.

Fig.5.1

I'm hoping that you are able to see the different types of cords here. From left to right and ignoring the numbers you can see on some of the samples ...

1. The thick orange cord on the very left hand side of the photograph is a twice twisted length of sari ribbon.

2. Next come two machine wrapped cords made from organza strips (yellow) and sari ribbon (purple)

3. A chunky weight wool machine wrapped with some areas left unwrapped to give added texture.

4. Two twisted cords - the yellow one on the left is stranded cotton and the bi-coloured one is a shiny chainette thread.

5. Next (actually marked 5 on the photograph!) are two plaited machine made cords. The left hand one of the two is a normal three stranded plait while the thicker one has four strands. I did struggle to get my head around how to plait more than 3 strands but once I got into the swing of it I thought I might actually go on and see if I could manage even more than 4.

6. Next is a bundle of three knotted cords. The first of these is made up of two machine wrapped cords which have been knotted together at random intervals. The second has been knotted in such a way that the cord twists around making a lovely spiralling cord. The third is made up of three machine wrapped cords which was supposed to be the double ridged hitching cord but I'm not at all sure that I did it correctly. Mine has turned into a lovely wide flat braid however. 

7. A wrapped cord with chunky beads added into the wrapping at intervals and also with some gaps left in the wrapping to expose the core threads which are of a contrasting colour.

8. (Marked 8 on the photograph too) is a cord made using a Lucet using the metallic chainette thread again.

9. These last two braids heading out to the right of the photograph are made on cording discs. The thicker of the two has produced a spiralling pattern with the use of the two colours of cords.

Chapter 6 - Tassels

Fig. 6.1

This time I think that the numbers on the page are easier to see so I'll use those to explain how each tassel was made.

1. A wide machined tassel using metallic machine thread.

2. A narrow machined tassel using the same thread as before.

3. A simple tied tassel using two colours of metallic machine thread.

4. A tassel made with stranded cotton with a buttonholed cap.

5 and 6. are silk cocoons decorated with beads with strings of beads as the tassel strands.

7. A decorated silk cocoon cap with variegated kinked rayon thread body.

8. Silk yarn bound with a strip of silk cocoon decorated with beads added to hide the binding threads.

9. Tubular yarn tassel with buttonholed plastic curtain ring as a header.

10. Soft silk yarn tassel bound, buttonhole lace added over the binding to hide the threads. Then four smaller tassels simply bound were added around the base of the buttonholed binding to make a tassel worthy of being a curtain tie back!

11. The header of this final tassel is a small cotton ball covered with buttonhole lace. The tassel itself is simply bound to hide the join with the header.

Chapter 7: Buttons

Fig. 7.1

Sample 1 is a series of Dorset buttons of various sizes and designs. I was pleased to have worked out how to make the spiral design in the larger two buttons.

2. The beaded top of a silk cocoon.

3. Fabric toggles with buttonholed ends and beads wrapped around them.

4. Toggles made from Tyvek - some with wire and beads added.

5. Toggles made from paper.

6. Embroidered and beaded buttons made on metal self-cover button bases.

7. Mountboard shapes covered with fabric and beads.

8. Yorkshire buttons. These, as the caption says, are made on a card template with notches around the edge and are definitely addictive!. I love the fact that they look like sea urchins.

And then finally ... because I couldn't resist experimenting a little ...

A little vessel made from a several strands of a thick silk yarn which I machine wrapped to make a cord and then spiralled around whilst binding it to make a little vessel. It is actually quite sturdy but small though the technique obviously has lots of potential for making larger vessels. 

Chapter 4 - Spiralling into stitch

You'll know by now why it's taken me so long to get around to blogging my progress on my course. I have been working away at it in the background but the work for the exhibition just had to take precedence for a while. Add to that summer school (more of which later), a holiday in the Cotswolds and over three weeks of family visiting the summer has just shot by. Finally I feel like I can try to get back on top of things but it is taking a little while to get into a proper routine again.

And so ... Chapter 4 and I'm stitching again!

Fig. 4.1

I always head for the needle and thread first and these samples were actually worked whilst I was in London visiting my son. In case you aren't able to see the caption to the top piece ... From the outside row 1 is double wrapped running stitch in two colours of space dyed rayon thread. Row 2 is chain stitch using two strands of stranded cotton. Row 3 is thick silk yarn couched with space dyed rayon. Row 4 is french knots in cotton perle 16 thread and Row 5 is feather stitch using two strands of stranded cotton.

Fig. 4.2

I stitched the large sample in my hand without a frame and prior to mounting it in my sketchbook the spiral centres formed little peaks. A lovely textured surface.

Samples 4 and 5 are more needle lace spirals with beads added to accentuate the spiral.

Fig. 4.3

Machine stitch for samples 6 (ordinary straight stitch) and 7 (whip stitch). I have to admit that these were actually quite fun to do and there is more machine stitch in my samples from Summer School.

Fig. 4.4

Sample 8 is a piece of hand-dyed scrim which I stitched on the machine using a spiral movement. Some of the resulting holes were then outlined with buttonhole stitch. I love the delicate feel of this piece though I'm not yet sure how I might use it in a final piece of work.

Sample 9 has woven spirals worked on random wrapping on a cheap wire bracelet. They look almost rose like.

Fig. 4.5

Sample 9 is a spiralled machine made cord couched down in some places with a contrasting thread. I love the three-dimensional nature of this sample and also the non-uniformity of the cord.

I'm adding some of the pieces I did at Summer School here because I based my work there on this module.

Fig. 4.6

Jean asked us to bring a black and white photograph for inspiration to her first session and I had chosen a photograph I took of the 'gherkin' office building in London as the spiralling pattern of the windows attracted me and fitted with my theme.

Fig. 4.7

 We had to continue the lines from our photograph onto the opposite page of our sketchbook to make a rough design.

Fig. 4.8

We then placed scraps of fabric and lengths of thread in a soluble fabric sandwich (sticky soluble on the bottom and transparent on the top) and then machine stitched them together.

Fig. 4.9

When I got home I tried a variation on this theme using a technique which Jan had told us about and this time just laid threads between the two layers of soluble fabric. I then stitched through each join by hand adding a tiny glass seed bead at each junction and leaving thread tails on my stitches. It produced a very soft and unstructured piece of lace! It's a technique I may well return to in the future.

Fig. 4.10

Another experiment - laying pieces of glue covered string down onto plastic and leaving it to dry overnight before adding machine stitch once the piece was sandwiched between the two sheets of soluble fabric.

Fig. 4.11

 I did this piece when I got home - again playing with the soluble fabric sandwich but this time laid spirals of silk fabric between the two and then machine stitched them together. I needed to take more care to ensure that I had caught them all with my stitching than I did however and needed to make some running repairs by hand once the soluble was dissolved away. I'm definitely hooked on the soluble fabrics though and will certainly be using them again in the future!

Fig. 4.12

Jan had us making up designs from a photograph - looking at the essence of what had attracted us to the image in the first place rather than slavishly copying it. I had used a photograph of a little purple snail on a yellow flowering plant for this design which was then drawn onto TAP paper using PITT brush pens and transferred onto soluble fleece before hand stitching onto a fine net. This was such a valuable exercise and I learned a great deal from Jan's design tips.